Templates

Start with an example. Make it yours.

Choose a useful starting point, then change the measurements for your project.

Featured templates

10 starting points

A standard six-cell 42 mm receiving plate with selectable solid or open backing, plus the separate fit pack before the full print.

A matched external spur pair for exploring speed and torque ratios in a hand-driven prototype.

A tapered socket-to-spigot starting point for joining two measured workshop fittings.

A compact six-socket strip for the everyday sizes that otherwise roll around the drawer.

A small L-bracket with seated fixing holes and side gussets for a custom mounting job.

A four-guide drilling template measured from two workpiece datum edges; print the diameter trials and verify transferred position before use.

A compact C-clamp with four swap-in jaw cartridges for light-duty prototype work; it is not load-rated.

A measured threaded cap with a shallow gasket recess for a trial closure fit; the recess does not prove sealing.

A removable panel grommet that can wrap around an existing cable without unplugging it.

A flanged push-fit lid for a small rectangular parts bin with rounded inside corners.

Browse the complete template catalogue and search by the job you need to do.