EazyGridfinity
Design a complete drawer, generate its segmented 42 mm baseplate, arrange mixed bins, and export separate production plates with measured fit tools.
Generators
Choose the part you want to make.
Pick a tool, enter your measurements and customise the design.
EazyMake systems
1 generatorThreaded parts
2 generatorsReplacement cap
Reverse-engineer a female cap from measured container threads.
Nuts & bolts
Generate a matched printable metric nut and bolt pair.
Basic parts
3 generatorsWasher, spacer & shim
Create a measured ring with a calibrated shaft or bolt clearance.
Bushing & sleeve
Create plain, flanged, stepped or split sleeves around a measured shaft.
Panel grommet
Create a retained cable passage for a measured panel hole and thickness.
Builders
4 generatorsAdapter Builder
Join measured sockets, spigots, printed threads, bolt flanges or low-pressure hose barbs with an inspected adapter.
Mounting plate
Drill a measured hole pattern into a rounded plate with plain, countersunk or counterbored holes.
L-bracket
Join a base leg and an upright with drilled or slotted rows, seats on the inside faces and optional side gussets.
Pipe saddle clamp
Arch a measured tube, pipe or conduit onto a surface with a calibrated cradle and drilled ears.
Seals & enclosures
2 generatorsO-ring face gland
Size a static axial gland around a measured off-the-shelf O-ring.
Press-fit lid
Cap a measured round or rectangular mouth with a flanged plug and a calibrated push fit.
Motion components
1 generatorInvolute spur gears
Generate a measured pair of external spur gears with explicit backlash.
Containers
1 generatorCanister + lid
Create conventional or modular threaded storage systems.
Workholding
4 generatorsUniversal C-clamp
Build a coarse-thread clamp with interchangeable jaw cartridges.
90° corner clamp
Hold two workpieces against a fixed square cradle.
Bench dog
Drop a calibrated shank into a measured dog hole with a round or flat-faced head.
Drill jig & template
Lay out a calibrated row of drill guides from two measured workpiece datum edges.
Holders
2 generatorsUniversal wall storage
Build measured cradles or open cable, hose and strap hangers on the same versioned EazyMount dock, single wall plate or multi-position rail.
Socket organizer
Labelled tiles or strips for a socket set with magnet pockets and calibrated drop-on dovetails that clip side by side.
Not sure where to start?
Search the complete library by the part or job you have in mind.