Design a complete drawer, generate its segmented 42 mm baseplate, arrange mixed bins, and export separate production plates with measured fit tools.

Reverse-engineer a female cap from measured container threads.

Generate a matched printable metric nut and bolt pair.

Create a measured ring with a calibrated shaft or bolt clearance.

Create plain, flanged, stepped or split sleeves around a measured shaft.

Create a retained cable passage for a measured panel hole and thickness.

Join measured sockets, spigots, printed threads, bolt flanges or low-pressure hose barbs with an inspected adapter.

Drill a measured hole pattern into a rounded plate with plain, countersunk or counterbored holes.

Join a base leg and an upright with drilled or slotted rows, seats on the inside faces and optional side gussets.

Arch a measured tube, pipe or conduit onto a surface with a calibrated cradle and drilled ears.

Size a static axial gland around a measured off-the-shelf O-ring.

Cap a measured round or rectangular mouth with a flanged plug and a calibrated push fit.

Generate a measured pair of external spur gears with explicit backlash.

Create conventional or modular threaded storage systems.

Build a coarse-thread clamp with interchangeable jaw cartridges.

Hold two workpieces against a fixed square cradle.

Drop a calibrated shank into a measured dog hole with a round or flat-faced head.

Lay out a calibrated row of drill guides from two measured workpiece datum edges.

Build measured cradles or open cable, hose and strap hangers on the same versioned EazyMount dock, single wall plate or multi-position rail.

Labelled tiles or strips for a socket set with magnet pockets and calibrated drop-on dovetails that clip side by side.